Products
Products
gas and oil installations, MEBA measurings...
Service program
Service program
service, calibration, CNC turning, milling...
Sales program
Sales program
Leser, Danfoss, Bopp&Reuther...
ISO 9001
ISO 29001
Contact information

SPECIJALNA OPREMA - Lučko d.o.o.

Dolenica 20, Donji Stupnik, 10250 Lučko

ZAGREB, HRVATSKA


POSLOVNA JEDINICA JUŽNA HRVATSKA

Ivana Pavla II 19a, 21212 Kaštel Sućurac,

SPLIT, HRVATSKA


Email: specijalna-oprema@specijalna-oprema.hr

Phone: +385 (0)1 653 0671, +385 (0)1 653 0677

Fax: +385 (0)1 653 0680

Homepage
Arrow
Solenoid valve
Arrow
Solenoid diaphragm valve type EMMV-P

Solenoid diaphragm valve type EMMV-P

The PDF document below provides detailed information for this product

Solenoid diaphragm valve type EMMV-P Solenoid diaphragm valve type EMMV-P
 
DN 40 - 100
 
PN 16
 
ANSI 150lb
 
p 0,5 - 12bar
 
t -20°C / +60°C
 
acceptable media natural gas, propane, air, water, non-aggressive gasses and liquids
 
connections EN1092, DIN2633, ANSI B 16.5,
 
voltage, frequency 230V (±10%), 50Hz
 
current, power 0,8A, 18VA
 
protection IP54 (IP65 on request)
 
switch duration,rate ED 100%, 15/min
 


 

APPLICATION

This is a diaphragm solenoid valve used for securing, limiting, shutting off and releasing medium in high variety of application.
 
It’s recommended that the solenoid and diaphragm is turned upwards.

 

DESIGN FEATURES

EMMV-P is operated with auxiliary power with diaphragm pre-help, which means that the solenoid drive opens against force of the closing spring only if the diference between valve inlet and outlet pressure is equal or greather than 0,5bar, and closes if power is interrupted. On the bothom lid it has possibility for installment of mechanical sensor for monitoring of closed position of the valve.
 
It comes in normally closed position, but on request can be altered.

 

ON REQUEST:

- possibility of AC or DC current 12V, 24V, 48V
- it comes in normally closed (NC) position, but on request can be altered to normally opened (NO)
- normal and ATEX approved design are available



APPLIED STANDARDS, CODES & DIRECTIVES

94/9 EC (ATEX) “Equipment and protective systems intended for use in potentially explosive atmospheres”
 
 
 
Pos. Part name Material Standard
1 Housing GJS-400-15 EN1563
2 Spindle 1.4301 EN10088-3
3 Seat CW614N EN12164
4 Plate S355 EN10277-2
5 Spring 1.4301 EN10088-3
7 Diaphragm housing GJS-400-15 EN1563
8 Diaphragm neoprene  
9 Nozzle CW614N EN12164
10 Lid GJS-400-15 EN1563
11 Solenoid coil SPO  
12 Elecronical switch SPO  

 

DN L (mm) H (mm) H1 (mm) WEIGHT(kg)
40 (1 1/2“) 200 290 360 13
50 (2”) 230 315 410 25
65 (2.5”) 290 330 420 32
80 (3”) 310 350 470 39
100 (4”) 350 390 510 58
125 (5”) 400 420 560 70
150 (6“) 480 490 640 85